Motorcycle Wallpapers, choose by BRANDS>
BMW Models >
BMW K1300S (2010)
USA MSRP: $15,550 USD
Engine
Type Water-cooled 4-stroke in-line four-cylinder-engine, four valves per cylinder, two overhead camshafts, dry sump lubrication
Bore x stroke 80 mm x 64.3 mm
Capacity 1293 cc
Rated output 175hp (129 kW) at 9,250 rpm
Max. torque 103 lb/ft (140 Nm) at 8,250 rpm
Compression ratio 13,0 : 1
Mixture control / engine management Electronic intake pipe injection/digital engine management including knock sensor (BMS-K)
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3
Performance / fuel consumption
Maximum speed Over 125mph 200 km/h
Fuel consumption per 100 km at constant 90 km/h 4,7 l
Fuel consumption per 100 km at constant 120 km/h 5,3 l
Fuel type Unleaded Premium
Electrical system
Alternator three-phase alternator 580 W
Battery 12 V / 14 Ah, maintenance-free
Power transmission
Clutch Multiple-disc clutch in oil bath, hydraulically operated
Gearbox Constant mesh 6-speed gearbox
Drive Shaft drive
Chassis / brakes
Frame Bridge-type frame, cast aluminium, load-bearing engine
Front wheel location / suspension BMW Motorrad Duolever; central spring strut
Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut with lever system, spring pre-load adjustable hydraulically (continuously variable) at handwheel, adjustable rebound damping
Suspension travel front / rear 4.5 inches (115 mm) / 5.3 inches (135 mm)
Wheelbase 62.4 inches (1585 mm)
Castor 4.1 inches (104.4 mm)
Steering head angle 60.4°
Wheels Cast aluminium
Rim, front 3,50 x 17"
Rim, rear 6,00 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 190/55 ZR 17
Brake, front Twin disc, floating brake discs, diameter 320 mm, 4-piston fixed calipers
Brake, rear Single disc brake, diameter 265 mm, double-piston floating caliper
ABS Standard equipment: BMW Motorrad Integral ABS (part-integral)
Dimensions / weights
Length 86 inches (2182 mm)
Width (incl. mirrors) 35.6 inches (905 mm)
Height (excl. mirrors) 48 inches (1221 mm)
Seat height, unladen weight 32.3 inches (820 mm) (low seat: 31.1 inches [790 mm])
Inner leg curve, unladen weight 71.2 inches (1810 mm) (low seat: 68.9 inches [1750 mm])
Unladen weight, road ready, fully fuelled 1) 560 lbs (254 kg)
Dry weight 2) 503 lbs (228 kg)
Permitted total weight 1014 lbs (460 kg)
Payload (with standard equipment) 454 lbs (206 kg)
Usable tank volume 5 U.S. gallons (19 litres)
Reserve approx. 1 U.S. gallon (4.0 litres)
Technical data relate to the unladen weight (DIN)
Motorcycle Insurance Informations
|
No comments:
Post a Comment